BEAMSTOP'R

5503 Mayfield Road

Lyndhurst, OH  44124

_________________________________

OFFICE:  +1 (440) 461-8287

EMAIL:  beamstopr@aol.com

LASER SAFETY BARRIERS

BEAMSTOP'R LASER ENCLOSURE TENTS


Where a total light-tight, portable laser-blocking barrier must be used, BEAMSTOP'R's Laser Enclosure Tent is the solution.


Class 4 (Class IV) and Class 3B (Class IIIb) lasers are dangerous and can present a very real eye hazard over a long distance. Ordinary fabrics are incapable of stopping such a harmful beam. A specially designed and manufactured laser blocking material -- like BEAMSTOP'R's patented B-35 Laserguard -- is required.

B-35 Laserguard fabric has been designed to meet the need of all industries using lasers of all classifications.  It is designed for use in medical facilities, hospitals and operating rooms, University research and development as well as the military.

B-35 Laserguard is black, has blackout capability, and lightweight, flexible, flame retardant and provides “superior” laser blocking capability.


Laser Enclosure Tent Features & Benefits:


  1. UV, near infrared far infrared and visible light protection.
  2. Can be dry cleaned or wiped own with a damp cloth
  3. Class 3b and Class 4 protection
  4. Several sizes available
  5. Frame of white powder coated high strength steel
  6. Height adjustment from 62” to 84”
  7. Adjustable IR panel
  8. Heavy duty zipper at entrance and four corners
  9. Two components; Frame and top as one, 4 walls as the other
  10. Soft shell carrying case provided
  11. Made of B-35 Laserguard fabric
  12. Available 8’ x 8’; 10’ x 10’; and 10’ x 20’. Larger sizes are available by connecting any of these sizes of frames side by side.
  13. Tent legs when fully collapsed are 62” high. Legs will extend up to 84” high with 5 height adjustment hole settings
  14. Outer leg is 1 ¼” x 1 ¼”; inner leg is 1’ x 1”
  15. Folded size of frame only: 5’ high x 8” wide x 8” wide
  16. Frame material: white powder coated high strength steel
  17. Material for top, front, back and side walls: B-35 Laserguard. (see material safety data sheet for more information)
  18. Laser IR target panel. Allows IR source for targeting laser.
  19. Complete with one fabric carrying case.
  20. Optional hard shell case available


B-35 Laserguard fabric is manufactured to "confine stray laser plume", so should a stray beam hit the fabric, non-hazardous smoke may appear and the area may glow, thus indicating the stray beam is present.

Copyright © 2014.  All Rights Reserved  |  Website Design by The Houseton Group  |  www.houseton.com

BEAMSTOP'R   |   LASER SAFETY PRODUCTS

Introduction Laser Blocking Curtains  Laser Blocking Screens Laser Cage Enclosures
Laser Safety Rooms Laser Blocking Window Covers 
Laser Enclosure Tent Optional Safety Features


BEAMSTOP'R Laser Safety Barriers are constructed from a patented B-35 Laserguard fabric. The fabric is
black, has blackout capability, is flexible, flame retardant per NFPA 701, and it provides protection from
Class 3B (Class IIIb) and Class 4 (Class IV) lasers by confining stray laser plume, following ANSI Standards.


We offer a

BROAD-SPECTRUM ANTI-MICROBIAL treatment for our laser barriers.

Laser Safety Solutions