LASER SAFETY ROOMS

BEAMSTOP'R Laser Safety Rooms are custom-sized to fit your specifications. Each laser safety room is constructed of 2 ¼” thick panels with steel trim on top, bottom, and sides, then covered with our patented B-35 Laserguard fabric.


Laser Safety Room Options

  • 2 X 4 Standard Acoustical Drop Ceiling

  • 3 Bulb T8 Flourescent Lighting with Electronic Ballast

  • Ceiling Mount Ultrasonic / Infrared Sensor to Prevent False Activation of Lighting

  • Thick Double-Sided Masonite Door with Flame-Retardant Core

  • ADA (Americans with Disabilities Act) Compliant Entrance Lockset (Options are Available to Meet Building Hardware Requirements.)

  • 7000 BTU Heater / Air Conditioner Combination Unit - 120 Volt with Remote Control

  • Limit Switch to Deactivate the Laser when the Door is Open

  • Acrylic Laser Rated Viewing Window

  • Interior Desking System


Class 4 (Class IV) and Class 3B (Class IIIb) lasers are dangerous and can present a very real eye hazard over a long distance. Ordinary fabrics are incapable of stopping such a harmful beam. A specially designed and manufactured laser blocking material -- like BEAMSTOP'R's B-35 Laserguard -- is required.


B-35 Laserguard fabric has been designed to meet the need of all industries using lasers of all classifications.  It is designed for use in medical facilities, hospitals and operating rooms, University research and development as well as the military.


B-35 Laserguard is black, has blackout capability, and lightweight, flexible, flame retardant and provides “superior” laser blocking capability.


The Laser Safety Room is a modular solution developed by BEAMSTOP'R for a work environment where multiple projects are ongoing and a self-contained laser-blocking safety area is essential. 


Laser Safety Room Features & Benefits

  • UV, near infrared far infrared and visible light protection.

  • Can be dry cleaned or wiped down with a damp cloth

  • Class 3b (Class IIIb) and Class 4 (Class IV) protection

  • Custom sized to meet facility requirements

  • Optional ceiling

  • Optional HVAC

  • Optional Acrylic viewing window

  • Optional security door and/or limit switch

  • Frames of each panel powder coated steel

  • Patented B-35 Laserguard fabric covering the center of each panel to "confine stray laser plume" 


B-35 Laserguard fabric is manufactured to "confine stray laser plume", so should a stray beam hit the panel, non-hazardous smoke may appear and the area may glow, thus indicating the stray beam is present.

Copyright © 2014.  All Rights Reserved  |  Website Design by The Houseton Group  |  www.houseton.com

LASER SAFETY BARRIERS

Laser Safety Solutions

BEAMSTOP'R   |   LASER SAFETY PRODUCTS

Introduction Laser Blocking Curtains  Laser Blocking Screens Laser Cage Enclosures
Laser Safety Rooms Laser Blocking Window Covers Laser Enclosure Tent Optional Safety Features


BEAMSTOP'R Laser Safety Barriers are constructed from a patented B-35 Laserguard fabric. The fabric is
black, has blackout capability, is flexible, flame retardant per NFPA 701, and it provides protection from
Class 3B (Class IIIb) and Class 4 (Class IV) lasers by confining stray laser plume, following ANSI Standards.

We offer a

BROAD-SPECTRUM ANTI-MICROBIAL treatment for our laser barriers.

BEAMSTOP'R

5503 Mayfield Road

Lyndhurst, OH  44124

_________________________________

OFFICE:  +1 (440) 461-8287

EMAIL:  beamstopr@aol.com